Here's Why the GR Corolla's AWD System Is Bizarre

GR Corolla Hero Image

That variable torque split isn’t as simple as it seems.

Of the modern hot-hatch crop, the Toyota GR Corolla remains the strangest of the bunch. While everyone else uses four cylinders and only a single driven axle (save for the Subaru WRX), the GRC’s three-banger and its strengths are well publicized. But what is truly strange about the GRC is its unconventional all-wheel drive system. Here’s exactly how it works.

The high level breakdown is that the GRC uses an AWD system that’s identical in layout but completely unlike its contemporaries in execution. Its layout is fairly standard: A transverse engine out front feeding a transaxle that leads into a transfer case that sends power to a rear differential. Externally, it’s closest to a Volkswagen Golf R, except that GRC’s transfer case doesn’t have a clutch pack. Technically, the GRC doesn’t even have a center differential, and that’s where it takes a real left turn.

The nerds among you will know that the GRC also has a variable torque split AWD system, configurable from 60% front, 40% rear, 50/50, and 30% front, 70% rear. Conventionally, this torque split would be managed by a center differential with a clutch pack that manages the torque output to the secondary axle. For example, a Lancer Evo can go from 100% FWD to 50/50 based on the locking of its center diff. The two critical takeaways about a variable torque split is figuring out where the power primarily goes, and then moving the torque elsewhere. In the case of the Evo and GRC, power goes to the front axle first, making sending more than 50% power to the rear difficult.

Evo AWD 1

Mitsubishi Motors

Evo AWD 2

Mitusbishi Motors

Older Subaru WRX STIs, which used a completely different style of AWD, had a roughly 40/60 split. Subaru’s AWD is mechanically locked together, meaning the torque split is constant and determined by one thing: A gearing difference. With the STI, the rear was very slightly overdriven at the transfer gear that sends power to the rear of the car, while that slip was managed with the center differential. The GRC also uses a gearing difference, but instead of a center differential, it uses a clutch pack to take up the slip. That same clutch pack also determines the variable torque split.

Getting to the meat and potatoes: The GRC’s rear axle is overdriven very slightly, just 0.7% at the transfer case. By managing the slip of the clutch pack, the GRC can vary its torque split at will. When the clutch is open, the system spins more freely and sends more power to the front. 50/50 is a little more locked up, while 30/70 becomes a real math problem.

Technically, the GRC isn’t sending 70% of its power to the rear. It’s sending 50%, but the slip of the clutch pack determines how much makes it back there. But in 30/70, the rear axle’s gearing advantage combined with a locked-up center clutch pack means that the rear actually starts subtracting torque from the front axle. By speeding up the rear axle, the front axle gets slowed down, sending its torque rearward. Confused yet?

It’s a novel bit of engineering and a workaround for using a transverse FWD-based AWD system. But it also makes the GRC completely unique and interesting to drive in that it doesn’t quite behave like it has 70% rear torque. In fact, Toyota itself says the 30/70 mode is largely for loose surfaces where the rear can actually spin faster, rather than on pavement where most of that energy is taken up by the clutch pack.

But if you’re a visual learner and this wall of text was just confusing, I highly recommend our video. Enjoy.

Get the best news, reviews, columns, and more delivered straight to your inbox. Sign Up Today

More AWD Fun